ipv6:If
IPV6 Interface
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| autoconfig | nw:AdminSt (scalar:Enum8) |
IPv6 Stateless address autoconfig | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| defaultRoute | nw:AdminSt (scalar:Enum8) |
Default Route Addition with Nexthop as RA Source Address | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| forward | nw:AdminSt (scalar:Enum8) |
IPv6 forward | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| llAddr | address:Ip |
IPv6 Link Local Address | Value must match ipv4 or ipv6 known format |
| llAddrUseBia | nw:AdminSt (scalar:Enum8) |
IPv6 Link Local Use BIA | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| urpf | ip:UrpfT (scalar:Enum8) |
IPv6 URPF Info | SELECTION: 0 - disabled 1 - strict 2 - loose 3 - loose-allow-default 4 - strict-allow-vni-hosts DEFAULT: disabled |
| useLinkLocalAddr | nw:AdminSt (scalar:Enum8) |
IPv6 Address Use Link Local Address | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| configError | ipv6:ConfigErr (scalar:Enum8) |
Config error | SELECTION: 0 - noerror 1 - nghbrAddress 2 - useLinkLocalOnly 3 - forward DEFAULT: noerror |
| operSt | ip:OperSt (scalar:Enum8) |
Operational State | SELECTION: 0 - unspecified 1 - down 2 - up 3 - failed DEFAULT: up |
| operStQual | ip:UnnumberedOperStQual (scalar:Enum8) |
Operational State Qualifier | SELECTION: 0 - unspecified 1 - parent-unnumbered 2 - child-numbered 3 - invalid-source 4 - invalid-interface 5 - intf-self-referential DEFAULT: unspecified |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |